Table of Contents
Advertisement
caused by the protective substances
applied to the heating element before
transport and is completely normal.
- Position the appliance in such a way that
the plug and socket are easily accessible.
- Do not use the appliance in rooms with a
surface area of less than 4 m
- The appliance is fitted with a safety
device which turns it off in the event of
accidental overheating.
- To reset the device, unplug the appliance
for a few minutes, remove the cause of
the overheating, then plug in again. If the
overheating reoccurs a number of times,
contact customer services.
- Before putting the appliance away, make
sure it is completely cool and unplugged
from the mains socket.
Do not store in dusty atmospheres.
- The appliance must never be hung in any
way.
Use in accordance with the designated use
Use this appliance only as described in this instruction manual.
All other use is considered improper. This appliance is not
suitable for commercial use. The manufacturer is not liable for
damage deriving from improper use of the appliance. This is an
household appliance only. It is not intended to be used in:
•
staff kitchen areas in shops, offices and other working
environments;
•
farm houses;
•
hotels, motels and other accommodation facilities;
•
bed and breakfast type environments.
This type of use invalidates the manufacturer's guarantee.
Fundamental safety warnings
Dear customer - the plug on the appliance heats up during use.
This is completely normal.
This HIGH POWER HEATING APPLIANCE complies with our usual
high standards. You should, however, make sure that your power
socket is in good condition and that the plug on the appliance is
plugged into the socket correctly to avoid accidental overheating.
If the appliance is used for long periods of time, we recommend
checking the plug and mains socket regularly. If in doubt, consult
an electrician.
Disposing of the appliance
DESCRIPTION
A
B
.
2
C
D
E
F
General instructions
Remove the heater from the packaging. Check that neither the
heater nor the power cable has been damaged during transport.
Do not operate the heater if damaged. Remove all publicity
material present on the appliance. The appliance is suitable for
free-standing or wall-mounted usage. Do not assemble the feet
if wall-mounted.
Electrical connection
-
-
Mounting the feet
Turn the appliance upside down on a rug or soft
surface in order to prevent damaging the paint
finish.
Fix the feet to the appliance with the nr. 4 screws
supplied (see fig. 1), 2 screws for each foot.
Wall-Mounting Installation
The wall mounting kit contains:
4 metal brackets (G)
2 screws 4,8x13 PH (H)
4 screws 4,5x25 PH ( I)
4 plastic anchors 6x30 (J)
Required tools for assembly and estimated assembly
time
Drill
Phillips type supplied (Screwdriver PH 2 x 100)
Estimated assembly time: 30 minutes
4
The appliance must not be disposed of with household
waste, but taken to an authorised waste separation and
recycling centre.
Power indicator light
ON/STAND-BY button
+/- adjustment buttons
MODE button (selects the operating mode)
"ECO plus" button
Timer button
Before connecting the appliance to the current outlet,
check that the voltage indicated on the appliance rating
plate is the same as your electric plant and that it can stand
the power consumption (Watt) indicated by the labelling.
If more than one appliance is used at once, it is important to
ensure that the electric plant is able to support the power
required.
Please note: use only supplied screws.
Advertisement
Table of Contents
