Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DeLonghi TCH Series
Summary of Contents for DeLonghi TCH Series
- Page 1 De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
- Page 2 TCH Series CERAMIC FAN HEATER...
-
Page 3: Electrical Connection (Uk Only)
Electrical connection (UK only) A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead, and an appropriate plug fitted, as below. WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard. - Page 4 DESCRIPTION Fig. 1 Fig. A Fig. B Fig. C Fig. D Optional screw...
-
Page 5: Safety Warnings
authorised service centre or a qualified INSTRUCTIONS FOR USE Read these instructions carefully before using the appliance. electrician in order to eliminate all risk. Failure to comply with these instructions can lead to injury to persons and damage to the machine. Important! The manufacturer is not liable for damage deriving from the This appliance can be used by children... -
Page 6: Safety Functions
which is turned off and on regularly by The appliance emits a beep and a dot flashes on the display. The appliance resumes operation a few seconds the energy supplier. after being placed in an upright position again. Do not use the appliance in small rooms when they are occupied by Use in compliance with intended use persons that are not capable of leaving... -
Page 7: Mounting The Base
Electrical connection of 7°C to avoid freezing. Before plugging the appliance into the mains socket, check that the mains power supply corresponds to the 5.3 Heating 1, 2 and Heating 3 value indicated on the rating plate and that the mains In this mode, the desired temperature can be selected by power supply is adequate for the load. -
Page 8: Maintenance
To set the timer, use the adjustment buttons + and - (B), polarity (see figure 2). Replace the cover as shown in the then wait a few seconds for the setting to be memorised. figure. Old batteries are harmful to the environment and The current settings are displayed again, together with the must be removed and disposed of in compliance with current symbol indicating that the timer has been set.
Need help?
Do you have a question about the TCH Series and is the answer not in the manual?
Questions and answers