Advertisement
[2] OPERATION MANUAL
QUICK REFERENCE
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
LC-40LE835U/830U/832U
1
Confirm that there are 7 screws (3 long screws, 3
middle screws and 1 short screw) supplied with the
stand unit.
2
Attach the supporting post for the stand unit onto
the base as shown below.
•
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward.
Forward
3
Insert the stand into the openings on the rear of the
TV.
Soft cushion
4
2
5
Long screws
1
2 – 3
LC-40/46/52/60LE835U/830U/832U/LC-60LE831U
Insert and tighten the 3 screws into the 3 holes on
the rear of the stand unit.
Insert the stand cover.
1
Insert the screw to secure the stand cover.
2
1
• To detach the stand, perform the steps in reverse
order.
Middle screws
Short screw
2
Hide quick links:
Advertisement
Troubleshooting
