EMS SmartCell Quick Start Manual page 6

Step 6
Check all device signal levels are stated as 'GOOD'.
Step 7
Test every device for correct operation, using appropriate test
equipment.
Note: sounders may activate upon activation of a wireless device if the
'Sounder activation method' is set to 'Immediate'.
Step 8
Weekly test the system in accordance with local codes of practice.
Step 9
Maintain the system in accordance with local codes of practice and
manufacturers recommendations.
©2020 EMS Ltd. All rights reserved Page 6 of 36 MK349-0001-99 (Issue 1) 22/10/2020 AJM