Table of Contents
Advertisement
Device signal levels
From access level 3 (as previously
shown on page 16), press the
button until the screen displays:
Press the
button and the screen
will display:
Press the
button until the screen
3
displays:
Press the
button and the screen
will display:
Press the
&
1
the required signal category.
Press the
button to select the
required category and the device
signals can be viewed, by pressing the
&
buttons.
3
Note: It is important that all devices have GOOD signal levels
!
to ensure the maximum robustness of wireless signalling.
If a device does not achieve a good signal level, for further guidance
refer to the
'How to improve device signal levels' section within the
SmartCell WZM Programming Guide (MK067).
©2020 EMS Ltd. All rights reserved
3
buttons to highlight
3
Page 32 of 36
View System Status
Maintenance/Test
Device Options
WZM Settings
Sounder.O/P Test
Device Signal List
Device Battery List
Edit Service Code
Sounder.O/P Test
Device Signal List
Device Battery List
Edit Service Code
Good Signal
Low Signal
No Signal
Good Signal
Low Signal
No Signal
Z01 A08
Dual Detector
1
First Floor Landing
GOOD Signal
MK349-0001-99 (Issue 1) 22/10/2020 AJM
08
00
00
More>
08
00
00
More>
80dB
Advertisement
Table of Contents
