Advertisement
Quick Links
Connecting the Pipe to a Ceiling Adapter
IMPORTANT!
Connect this 1.5" NPT threaded
may disconnect the parts and may cause injury or property damage.
pipe end to the ceiling plate
1
To connect the pipe to a ceiling adapter,
twist the male threaded end into the
female thread of the adapter.
Connect this 1.5" NPT
threaded pipe end to
(EE) x 4
the mount head
OR
For extension
Pipe Connector
longer than 3 ft
connect two or
more pipes
together with a
pipe connector
(not included).
Allen Key
(II)
Do not loosen screws all the way when making adjustments, this
Ceiling
Vaulted Ceiling Adapter
(not included)
(DD) x 2
Allen Key
OR
(EE) x 2
These screws are only included
with your ceiling adapter
or pipe connector.
2
Using allen key (II), tighten screws onto the
pipe and secure the position.
Cable Management
(B)
Take out the top piece on the
(DD) x 4
cover plate (B) and push
the cord through the opening.
3"~3' 1.5" NPT THREADED PIPE
(II)
QG-PRO-PM-3IN-B / W
QG-PRO-PM-6IN-B / W
QG-PRO-PM-1FT-B / W
QG-PRO-PM-2FT-B / W
QG-PRO-PM-3FT-B / W
CAUTION!
363kg
Do not exceed the maximum rated weight
(800lbs)
specified. Otherwise, serious injury or
RATED
property damage may occur.
5 Year Limited Warranty
5 Year Limited Warranty
Version June 2016
Version June 2016
© 2016
QualGear LLC
Advertisement
Related Manuals for QualGear pro-av QG-PRO-PM-3IN-B
Summary of Contents for QualGear pro-av QG-PRO-PM-3IN-B
- Page 1 Otherwise, serious injury or more pipes RATED property damage may occur. together with a pipe connector (not included). Allen Key (II) 5 Year Limited Warranty 5 Year Limited Warranty © 2016 QualGear LLC Version June 2016 Version June 2016...
- Page 2 Before starting installation, please check that all parts shown in this checklist IMPORTANT: are included. If any parts are missing or damaged, contact your local distributor or support@qualgear.com for replacement parts and do not start assembly and installation WARNING until you receive all the parts.