Advertisement
Quick Links
7
Hanging the Projector Assembly onto the Projector Plate
Projector Plate
Projector Mount
Slide projector assembly into the
projector plate until you hear a click.
Projector
Tighten the screws using Allen Key (H)
as shown on the right.
11
gap
Click!
Allen Key (H)
PROJECTOR MOUNTING KIT
Scan the QR Code™ below
for more info about this product:
1 Year Limited Warranty
QG-KIT-VA-3IN-W
CAUTION!
Do not exceed the maximum rated weight
32kg
32kg
(70lbs)
(70lbs)
specified. Otherwise, serious injury or
Rated
Rated
property damage may occur.
Version: November 2017
Advertisement
Related Manuals for QualGear QG-KIT-VA-3IN-W
Summary of Contents for QualGear QG-KIT-VA-3IN-W
- Page 1 Hanging the Projector Assembly onto the Projector Plate QG-KIT-VA-3IN-W PROJECTOR MOUNTING KIT Projector Plate Projector Mount Click! Slide projector assembly into the projector plate until you hear a click. Allen Key (H) Projector Scan the QR Code™ below for more info about this product:...
-
Page 2: Parts Checklist
Before starting the installation, please check to see that product package includes all parts as shown If any parts are missing or damaged, contact your local distributor or support@qualgear.com for replacement parts and do not start assembly WARNING and installation until you receive all the parts. - Page 3 Mounting to a Vaulted Wooden Joist or Wooden Stud Ceiling For concrete ceiling mounting, NOTE follow step 1b. Stud Finder Using a power drill and a 5/32" wood drill bit, drill holes of 5/32" (4mm) diameter, and 2.5" (65mm) depth at the marked locations. Using an edge-to-edge stud finder, find the Using a straight edge, mark the centerline Mounting to a Vaulted Concrete Ceiling...
- Page 4 Installing the Vaulted Ceiling Adapter to the Ceiling WOODEN JOIST CEILING Align the mounting holes on the vaulted ceiling adapter with the drilled holes on the ceiling, insert screws (F) into the mounting holes and tighten with a socket wrench. Using a power drill and a 3/8"...
- Page 5 Connecting the Pipe to the Projector Plate Joining the Pipe to the Ceiling Adapter To connect the 3-Inch NPT pipe (D) to the projector plate, IMPORTANT! Do not loosen screws all the way when making adjustments, this twist the male threaded end of the pipe into the female may disconnect the parts and may cause injury or property damage.
- Page 6 Making Adjustment for Mounting Attaching the Projector Mount to the Projector Screws (O/P/J/Q) Allen Key (H/ I) Washers (K) For screws (O or P) only Projector Extension Brackets (not included) Allen Key (H) Allen Key (H) Use washers (K) for screws (O or P) only. NOTE Depending on your projector, use the appropriate screws (O/P/J/Q) and then Extension Brackets...
Need help?
Do you have a question about the QG-KIT-VA-3IN-W and is the answer not in the manual?
Questions and answers