Ec Declaration Of Conformity - Black & Decker BCD7122 Original Instructions Manual

ENGLISH
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.

EC declaration of conformity

%
MACHINERY DIRECTIVE
BCD7122 - Drill
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62481-1:2015, EN62481-2-1:2018/A11:2019
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact Black & Decker at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Black & Decker.
Black & Decker Europe, 270 Bath Road, Slough,
Guarantee
Black & Decker is confident of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent.
Terms and conditions of the Black & Decker 2 year guarantee
and the location of your nearest authorised repair agent
10
(Original instructions)
Ed Higgins
Engineering Director
Berkshire, SL1 4DX
United Kingdom
06.17.20
can be obtained on the Internet at www.2helpU.com, or by
contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.