Costway GOPLUS SP36162 User Manual

Costway GOPLUS SP36162 User Manual

Motorized treadmill

Advertisement

USER'S MANUAL
MOTORIZED TREADMILL
SP36162

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOPLUS SP36162 and is the answer not in the manual?

Questions and answers

Claudio Vives
February 23, 2025

¿COMO ENGRASAR LA CINTA TREADMILL SP36162 DE ?

Subscribe to Our Youtube Channel

Summary of Contents for Costway GOPLUS SP36162

  • Page 1 USER'S MANUAL MOTORIZED TREADMILL SP36162...
  • Page 2 1. CAUTION To avoid any hurts, please read this manual carefully before using.  For safety purpose do not stand on running belt while start.  Please stop immediately for any feeling of vomit、jerky during using.  Please increase speed slowly if needed. ...
  • Page 3  Waterdrop is prohibited to run into the machine , especially to motor, power line and plug.  Danger may cause if wearing long dress or other unsuitable dresses during use.  Encloser spaces, air uncirculated places and with flammability places are prohibited to use the machine.
  • Page 4 6. Assemble Instruction Put M16 stretch know and M12 fix knob to the places as the picture show, then put safety key on the yellow area of panel. 7. Control Panel 1. Check that the red power switch on the back of the machine is turned off.
  • Page 5 2. The power supply socket should be turned off at the wall, then insert the power cable into the wall and at the back of the machine. 3. Turn on the power supply at the wall and turn on the red power switch at the back of the machine. 4.
  • Page 6 8. Fold and Unfold Fold: Turn on the fixed knob then lift the running board to assemble the machine.Pull out the tension knob,aimed at the platform then release the knob to fix the machine.Move the machine. Unfold: Pull out the tension knob then fall down the running board and fix the machine with the fixed knob then use the machine after electrify.
  • Page 7 10. Runbelt Adjustion (1) Running belt deviate to left Start the machine by speed at 2.0-3.0KM/h without loading, use die nut to make the screw go 1/4 circle(see fig1). Then make the machine running without loading 1-2 minutes. Please adjust like this to make the belt till to mid place. (2) Running belt deviate to right Start the machine by speed at 2.0-3.0KM/h without loading, use die nut to make the screw go 1/4 circle(see fig2).
  • Page 8 Great products so far February 24, 2018 Great product so far. Fast delivery, easy setup, and working without any issues. With your inspiring rating, Costway will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE! US office:Fontana...

Table of Contents