Waste Line Connection - Bryant CNPHP Installation Instructions Manual

WASTE LINE CONNECTION

If the condensate line is to be connected to a waste (sewer) line, an
open trap must be installed ahead of the waste line to prevent
escape of sewer gases (See Fig. 9 ).
Fig. 9 - - Condensate Drain to Waste Line
!
EXPLOSION HAZARD
Failure to follow this warning could result in personal injury
or death.
Provide trap with air gap in drain line when connecting to
waste (sewer) line.
E2014 Bryant Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
WARNING
A10216
Edition Date: 01/14
6
Catalog No. IM---CNPH ---07
Replaces: IM--- CNPH--- 06