Programme Sequence - Miele W 916 Operating Instructions Manual

Programme sequence

Soak
Pre-wash
Main wash
Top-up rinse
Graduated rinsing
No. of rinses – normal
–Part load
–Short wash
Rinse and interim spin (rpm)
Final spin (rpm)
Anti-crease spin and loosen
Rinse hold
without final spin
Wash rhythm
Water level – Wash
– Rinse
Explanations:
Function included
X
– Function not included
1)
A 4th rinse automatically switches in if there is too much foam in the drum, or if a spin speed
lower than 800 rpm has been selected.
2)
Increasing the water level:
The water level can be increased from a low level to a higher level by pressing the "Water plus"
button.
Top-up rinse:
Additional water flows into the drum, and the suds are cooled slightly. Hot water might damage
plastic drain pipes.
Graduated rinsing:
The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at
intervals. This minimises the danger of creasing, by avoiding sudden temperature changes.
WOOL:
Wool is susceptible to damage from movement when it is wet. Drum movement times during the
programm are shorter, and the drum rotates more slowly.
18
All manuals and user guides at all-guides.com
COTTONS
optional
optional
from 75°C
3 or 4
max. 1000
max. 1600
max. 30 mins
optional
optional
normal
low
low
MINIMUM IRON
optional
optional
X X
–
– from 50°C
1)
3
2 3
2 2
max. 500
max. 900
max. 30 mins
optional
optional
normal
2) 2)
low
2)
medium
DELICATES
optional
optional
X
–
from 50°C
3
3
3
–
max. 600
max. 30 mins
optional
optional
gentle action
high
2)
high