Table of Contents
Advertisement
Tail and Brake Lamps
(Lucas No. 353, 12 volt 6/24 watt, double filament bulb fitted in each lamp.) The
rim and the glass are removed separately and in this order by peeling back the
rubber retaining ring.
Number Plate Illuminator
Two Lucas No. 989, 12 volt 6 watt, or Lucas No. 994, 12 volt 4 watt bulbs fitted. To
gain access to the bulbs, remove the securing screw and withdraw the cover.
Interior Lamp
(Lucas No. 254, 12 volt 6 watt festoon type bulb fitted.) To gain access to the bulb,
pull off the cover.
Ignition Warning Light
(Lucas No. 987, 12 volt 2.2 watt screw cap type bulb fitted.) The bulb holder can
easily be withdrawn from the rear of the panel for bulb renewal.
Direction Indicators
(Lucas No. 256, 12 volt 3 watt festoon type bulbs fitted.) To replace bulb withdraw
the cover as explained on page 32, fit new bulb and replace cover.
Instrument Panel Lights
(Lucas No. 987, 12 volt 2.2 watt screw cap type bulb fitted.) Replacing these bulbs
is best left to the safe hands of a service station.
ELECTRICAL SYSTEM—Lamps
63
Advertisement
Table of Contents
