Pioneer DV-510K-S Service Manual page 38

1
4. How to confirm the version of the firmware
Press the ESC then the CHAP key on the remote control unit for servicing. The version of the firmware is labeled ROM
NUMBER. Check if the version is the latest one.
A
ROM NUMBER
REG CHK
SUM CHK
FL VERSION
CHIP VERSION
B
How to interpret the version code:
Y J A 8 4 2 8 C
C
5. Troubleshooting
1 If updating of the firmware failed
If the main unit was turned off during updating, it cannot initialize and start up again properly. In such a case, replace the
flash ROM on the DVD MT PCB Assy.
2 If updating of the firmware using the disc for updating failed
D
• Was the disc for updating recognized properly?
Check if the volume label of the disc is PIONEER.
• Is playback of a disc other than the disc for updating possible?
If playback of a test CD is also impossible, a reading section, such as PU, may be defective. In such a case, repair the
defective part first.
If playback of a test CD is possible, the disc for updating may be defective. Check for any scratches or foreign matter,
such as fingerprints, on the reading surface.
If no problem is found with the disc, create a new disc for updating again.
E
F
38
1
2
AREA:UR REGION:5
YJA8248C
32
3681
1.16
1389EE
Number of releases on the same release date
Release date:(Example:2008.4.28)
8: Year
4: Month (1-9 [Jan-Sep], A-C [Oct-Dec])
28: Day
Fixed
2
3
DV-510K-S
3
4
4