Reolink Argus 2 User Manual page 13

Reolink Wireless Battery-powered Camera
Note:
1. Please power on the camera by power switch button before initial setup.
(Suits for Argus PT, Argus Eco, Argus 3, Argus 3 pro.)
2. If you are not sure whether you hear the right sound, you may tap "Demo" to
hear the sample sound. If you couldn't hear the repeated Ding sounds, please reset
your camera.
Step 2. Tap on the icon
in the top right corner to start the initial setup.
Step 3. Scan the QR code on the back of the camera. If the phone doesn't respond,
please tap Input UID/IP and then manually type in the UID (16-digit characters
under the QR code of the camera).
Note: You may tap Light to enable flash light when setting up in a dark
environment.
12