Get Started; Install Batteries; Connect Power; Set Time - Philips 3000 Series User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Install batteries

The batteries can only back up clock and alarm
settings.
Caution
•
Risk of explosion! Keep the batteries away from heat,
•
Batteries contain chemical substances, so they should
be disposed of properly.
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.

Connect power

Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electrical shock! When you unplug the power
adaptor, always pull the plug from the socket. Never
pull the cord.
•
manufacturer or sold with this unit.
EN
4
Note
•
The type plate is located at the bottom of the clock radio.

Set time

Note
•
You can only set time in standby mode.
1
In standby mode, press and hold SET TIME
for 2 seconds.
2
Press HR to set hour and MIN to set
minute, then press SET TIME
The time is set.