Table of Contents
Advertisement
Connecting peripheral devices
Printer
✍
Before you connect peripherals,
turn off the computer and all
peripherals.
Connect the power cord only
after connecting all cables.
Turn on the computer only after
turning on all peripherals.
You can connect a printer while
the floppy disk drive is in use.
When using a USB printer,
connect it to the USB connector
of your computer or of the
docking station.
If you are using a printer that
does not support Windows 98,
it may not function properly.
When using a USB printer,
connect it to the USB connector
of your computer or of the
docking station.
Printer
You can connect the printer to your computer using the printer cable and the supplied
floppy disk drive cable to print documents.
Before using the printer
❑
You need to install the driver software supplied with the printer.
To connect a printer
Plug the floppy disk drive cable to the docking/FDD connector on your computer.
Then connect the printer cable (supplied with the printer) to the PRINTER connector
of the floppy disk drive cable.
Floppy disk drive connecting cable
Printer
Printer cable (optional or supplied
Power cord
To docking / FDD connector
with the printer)
70
n N
Advertisement
Table of Contents
