Sony VAIO PCG-X18 User Manual page 71

Connecting peripheral devices
Mini docking station


Use the mini docking station
only with the PCGA-ACX1 AC
adapter, supplied with your
notebook computer.
When a charged battery is
inserted in your computer, you
can attach the mini docking
station without turning off the
computer.
When attaching your
computer to the mini docking
station, do not attempt to
insert or remove the battery
pack. Lifting and turning the
computer with the attached
mini docking station may
cause a temporary loss of
power.
To disconnect your mini
docking station completely
from the mains voltage,
unplug the AC adapter.
Please make sure that the
socket outlet is easily
accessible.
To connect the mini docking station to your computer
Connect the mini docking station to the docking/FDD connector on the back of your
computer.
1
Open the cover of your computer.
2
Attach the left side tab of the mini docking station to the left side hollow of your
computer.
3
Push the tab into the hollow firmly until it clicks.
Docking/FDD connector
71
n N