Table of Contents
Advertisement
Available languages
Available languages
English (GB) Installation and operating instructions
Original installation and operating instructions
These installation and operating instructions
describe Grundfos CIM 040.
Sections 1-4 provide important information on the
product, information necessary to be able to unpack,
install and start up the product in a safe way.
Sections 5-8 provide important information on
service, fault finding and disposal of the product.
CONTENTS
1.
2.
3.
4.
5.
6.
7.
Read this document before installing the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.
1. General information
1.1 Hazard statements
The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.
DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
personal injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which, if
not avoided, could result in minor or
moderate personal injury.
The hazard statements are structured in the
following way:
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.
1.2 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Page
Observe these instructions for explosion-
3
proof products.
3
3
A blue or grey circle with a white graphical
4
symbol indicates that an action must be
4
taken.
4
5
A red or grey circle with a diagonal bar,
5
possibly with a black graphical symbol,
indicates that an action must not be taken
6
or must be stopped.
6
7
If these instructions are not observed, it
7
may result in malfunction or damage to the
equipment.
7
Tips and advice that make the work easier.
3
Advertisement
Table of Contents
