Advertisement
PREFACE
Thank you for purchasing the F
DSU-FR*
The F
(MB2198-01-E)*
to a user system that uses the MB96350 series (LQFP-64P) microcontroller from the FUJITSU
F
2
MC-16FX family.
This manual explains how to handle the F
ulator. Read this manual before using the MB2198-503-E.
Please contact the sales or support representative for details on the mass production and evaluation
MCU models that can be used with this product.
*1 : F
*2 : The package is the FPT-64P-M24 (0.5mm lead pitch, 10mm × 10mm body size).
*3 : FR, the abbreviation of FUJITSU RISC controller, is a line of products of FUJITSU MICRO-
*4 : Referred to as the "header board"
*5 : Referred to as the "emulator"
*6 : Referred to as the "adapter board"
■ Handling and use
See the following manuals for details on how to handle and use this product, and for precautions on
using the product safely.
■ European RoHS compliance
Products with a -E suffix on the part number are European RoHS compliant products.
■ Notice on this document
All information included in this document is current as of the date it is issued. Such information is
subject to change without any prior notice.
Please confirm the latest relevant information with the sales representatives.
■ Caution of the product described in this document
The following precautions apply to the product described in this manual.
CAUTION
Cuts
Damage
Damage
3
emulator.
2
MC-16FX LQFP-64P header type 3 is a header board*
5
and the DSU-FR emulator F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
ELECTRONICS LIMITED.
• DSU-FR EMULATOR MB2198-01-E OPERATION MANUAL
• DSU-FR EMULATOR F
MANUAL
Indicates a feature that, if not used correctly, may result in minor or moderate in-
juries, and which may cause the customer system to malfunction.
This product has parts with sharp points that are exposed. Do not touch edge of
the product with your bare hands.
When connect the header board to the user system, correctly position the index
mark (▲) on the NQPACK mounted on the user system with the index mark (▲)
on the header board, otherwise the emulator system and user system might be
damaged.
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.
2
MC-16FX*
1
LQFP-64P*
2
MC-16FX BGA-416P adapter (MB2198-500-E)*
2
MC-16FX LQFP-64P header type 3 for the DSU-FR em-
2
MC-16FX BGA-416P ADAPTER MB2198-500-E OPERATION
i
2
header type 3 (MB2198-503-E) for the
4
used to connect the DSU-FR emulator
6
Advertisement
