Sony VAIO PCG-SR1K User Manual page 76

Notes on Use
Adding Memory
!
Do not touch any part of the
motherboard or the other
components inside the computer.
6
Before you remove the module from its package, touch a metal part of the
computer to discharge any static electricity accumulated on your body. Remove
the module from its protective package.
7
Install the memory module by holding the module edge connector pointing
down and the notch on the right, and then insert it diagonally into an empty slot.
8
Lower the memory module until it clicks into place on both ends.
1 Slide the memory module into the slot.
2 Snap the connectors into place when the board is correctly seated.
n N 76