Getting Help
Troubleshooting
7
Press the arrow keys to select Exit (Save Changes) and then press Enter.
The message "Save configuration changes and exit now?" appears.
8
Check that [Yes] is selected, then press the Enter key. The computer will restart.
My computer does not shut down
It is best to shut down your computer using the Shut Down command on the
®
Windows
Start menu. Using other methods, including those listed here, may result
in loss of unsaved data. If the Shut Down command does not work properly, follow
these steps:
❑
Restart the computer by pressing Ctrl + Alt + Delete and by choosing Shut Down
in the Task Manager.
❑
If this does not work, slide the power switch forward and hold it for at least four
seconds, this turns off the power.
❑
Unplug the computer from the AC adapter and remove the battery pack from
your computer.
My computer "locks up"
❑
Try restarting the computer. On the Windows
click Shut Down, and then select Restart.
❑
If you cannot restart as described in the preceding step, you can restart the
computer by pressing Ctrl+Alt+Delete once and then clicking Shut Down in the
Windows Task manager.
❑
If the previous step does not work, slide the power switch toward the front and
hold it for at least four seconds. This turns off the power.
n N
®
taskbar, click the Start button,
65