Sony VAIO PCG-SR1K User Manual page 51

Connecting peripheral devices
Floppy Disk Drive
✍
Do not press the Eject button while
the LED indicator is on. It may
damage the diskette.
If the diskette does not come out
by pressing the Eject button,
disconnect the floppy disk drive
from the computer.
To insert a diskette
1
Hold the diskette with the label side facing up.
2
Gently push the diskette into the drive until it clicks into place.
To remove a diskette
When you finish using the diskette, wait until the LED indicator turns off and then
press the Eject button to remove the diskette.
To remove the device
If you unplug this device from the computer when turned on, your system might
crash and you might lose data that you didn't save before.
If your computer is turned off, you do not have to follow these instructions.
1
Double-click in the task tray.
Floppy disk drive
3.5" diskette
Eject button
LED indicator
n N 51