Table of Contents
Advertisement
Power saving (Sleep mode)
The printer will go into sleep mode to save power if no operations are carried out and no
data is sent from the computer for a set time.
Sleep mode is automatically canceled if data is sent from the computer or an operation
panel key is pressed.
10
● The printer will take longer (a maximum of 5 minutes) to warm up
(the time the fixing assembly temperature takes to rise) if it has been
in sleep mode for a long time.
● The factory setting for sleep mode is 60 minutes. You can use the
menu function to change this to 5, 15, 30, 60 or 180 minutes.
Advertisement
Table of Contents
