Canon imageCLASS MF6500 Series Starter Manual page 10

13
When you install PageManager
and OmniPage, follow the on-
screen instructions.
For Network Connection (MF6580 Only)
NOTE
– This machine is set by default to – This machine also supports
automatically draw an IP address automatic IP addresses using
using DHCP. If your network server
BOOTP and RARP protocols. For
or router is configured to provide a definitions and an explanation of
DHCP address, all you need to do each, please refer to the Advanced
is connect a network cable and Guide.
turn on the machine. The machine
will draw an IP address
automatically.
5 6
Confirm that <1. IP Use [
ADDRESS AUTO.> is select <OFF>, then press
displayed, then press [OK].
[OK].
17
14
Specify the IP Address
Manually
1
Press [Additional
Functions].
7
] or [ ] to Confirm that <2. IP
ADDRESS> is displayed,
then press [OK].
15 16
A
Connect the machine and your You have now completed
computer with a USB cable (A). installation.
2 3
Use [ ] or [ ] to Use [
select <9. SYSTEM select <2. NETWORK
SETTINGS>, then press SETTINGS>, then press
[OK]. [OK].
8 9
Use the numeric keys to Confirm that <3. SUBNET
enter the IP address MASK> is displayed, then
number, then press [OK]. press [OK].
Ex.
I P A D D R E S S
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
4
] or [ ] to Confirm that <1. TCP/IP
SETTINGS> is displayed,
then press [OK].
10
Use the numeric keys
to enter the subnet
mask number, then
press [OK].
Ex.
S U B N E T M A S K
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
18