Disconnecting Your Computer From The Port Replicator - Sony Vaio PCG-GRS515M Instruction & Operation Manual

Connecting peripheral devices
6 Turn on the notebook.
✍
When you use the port replicator for the first time, the installation of the network drivers starts automatically.
When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the
attached port replicator may cause a temporary loss of power.
Use the AC adapter that comes with your notebook or the optional Sony adapter.

Disconnecting your computer from the port replicator

To disconnect your computer from the port replicator, proceed as follows:
1 Stop the connected peripherals.
2 Close the cover and pull the levers on each side of the port replicator to disconnect the computer from
the port replicator.
3 Lift the notebook away from the port replicator.
n N
67