Introduction; Warning - SATA DY03001 Manual

Introduction

This meter is a compact 3 1/2-digit digital multimeter for measuring DC and AC voltage, DC current,
resistance, diode and continuity. It features polarity indication, low battery indication, small size, lightness,
and uses box-type design. It is easy to carry and is an ideal test tool.
The multimeter has been designed according to IEC 61010 concerning electronic measuring
instruments with a measurement category (CAT II 300V) and Pollution degree 2.

Warning

To avoid possible electric shock or personal injury, follow these guidelines:
●
Do not use the meter if it is damaged. Before you use the meter, inspect the case. Pay particular
attention to the insulation surrounding the connectors.
●
Inspect the test leads for damaged insulation or exposed metal. Check the test leads for
continuity. Replace damaged test leads before you use the meter.
●
Do not use the meter if it operates abnormally. Protection may be impaired. When in doubt, have
the meter serviced.
●
Do not operate the meter where explosive gas, vapor, or dust is present.
●
Do not apply more than the rated voltage, as marked on the meter, between the probes or
between any probe and earth ground.
●
Before use, verify the meter's operation by measuring a known voltage.
When measuring current, turn off circuit power before connecting the meter in the circuit.
●
Remember to place the meter in series with the circuit.
When servicing the meter, use only specified replacement parts.
-1-
DY03001 Users Manual