Development Hardware Connections; Attach Rcm2300 To Prototyping Board - RabbitCore RCM2300 Getting Started Manual

2.3 Development Hardware Connections

There are three steps to connecting the Prototyping Board for use with Dynamic C and the
sample programs:
1. Attach the RCM2300 to the Prototyping Board.
2. Connect the programming cable between the RCM2300 and the PC.
3. Connect the power supply to the Prototyping Board.

2.3.1 Attach RCM2300 to Prototyping Board

Turn the RCM2300 module so that the header pins and the mounting hole of the RCM2300
line up with the sockets and mounting hole on the Prototyping Board as shown in Figure 4.
Align the module headers J4 and J5 into sockets J1 and J2 on the Prototyping Board.
Figure 4. Install the RCM2300 on the Prototyping Board
Getting Started Manual
R39 C23
D3
RT1
C3
C11 U1
C8
R15
JP2
JP1
Line up the
mounting holes
RCM2300
9