Other Factory Versions; Physical & Electrical Specifications - RabbitCore RCM2300 Getting Started Manual

1.1.1 Other Factory Versions

To accommodate developers with specific needs, alternate versions of the RCM2300 mod-
ule can be obtained in production quantities on special order.
Low-power variants of the RCM2300 running at 3.686 MHz and 3.3 V can be custom
made in quantity. The clock can be changed dynamically to any one of five frequencies as
low as 32 kHz to reduce power consumption even further.
1.1.2 Physical & Electrical Specifications
Table 1 lists the basic specifications for the RCM2300.
Specification
Power Supply
Size
Environmental
NOTE: For complete product specifications, see Appendix A in the RabbitCore
RCM2300 User's Manual.
The RCM2300 modules have two 26-pin headers to which cables can be connected, or
which can be plugged into matching sockets on a production device. The pinouts for these
connectors are shown in Figure 1 below.
/IORD
SMODE1
STATUS
2
Table 1. Basic RCM2300 Specifications
4.75 – 5.25 VDC (108 mA at 22.1 MHz clock speed)
1.15" × 1.60" × 0.55" (29 mm × 41 mm × 14 mm)
° °
–40 C to 85 C, 5–95% humidity, noncondensing
J4
GND VCC
PC0
PC1
PC2
PC3
PC6
PC7
PE2
PD3
PD4
PD5
/IOWR
PE0
PE1
SMODE0
PE4 PE5
PE7
A3
A2
A1
A0
Note: These pinouts are as seen on
the Bottom Side of the module.
Figure 1. RCM2300 Pinout
Data
J5
PA0 PA1
PA2 PA3
PA4 PA5
PA6 PA7
/RES PB0
PB2 PB3
PB4 PB5
PB7 D7
D6 D5
D4 D3
D2 D1
D0 VBAT
VCC GND
RabbitCore RCM2300