Download Print this page

Advertisement

Available languages

Available languages

Quick Links

INTRODUCTION
BEFORE YOU START
The Photon EX is a professional 1/10 scale touring car and should be
built only by persons aged 16 years or older with previous experience
building and operating R/C model cars. This is not a toy and is not
intended for use by beginners or by children without direct supervision of a
responsible, knowledgeable adult. Read the instruction manual carefully
before building.
T.O.P. Racing shall not be liable for any loss, injury or damages, whether
direct, indirect, special, incidental, or consequential, arising from the use,
misuse, or abuse of this product and/or any product or accessory required
to operate this product.
GENERAL PRECAUTIONS
This product is not suitable for children under 16 years of age without
the direct supervision of a knowledgeable adult.
Assemble this kit only in places away from the reach of small children.
First-time builders and users should seek advice from people who have
building experience in order to assemble the model correctly and to
allow the model to reach its performance potential.
Exercise care when using tools and sharp instruments.
Take care when building, as some parts may have sharp edges.
Keep small parts out of reach of small children. Children must not
be allowed to put any parts in their mouth, or pull vinyl bag over their
head.
Immediately after using your model, do not touch equipment on the
model such as the motor and speed controller, because they generate
high temperatures. You may seriously burn yourself by touching them.
Follow the operating instructions for the radio equipment at all times.
Do not put fingers or any objects inside rotating and moving parts, as
this may cause damage or serious injury as your finger, hair, clothes,
etc. may get caught.
Be sure that your operating frequency is clear before turning on or running
your model, and never share the same frequency with somebody else at
the same time. Ensure that others are aware of the operating frequency
you are using and when you are using it.
Always turn on your transmitter before turning on the receiver in the car.
Always turn off the receiver before turning off your transmitter.
Keep the wheels of the model off the ground when checking the
operation of the radio equipment.
Disconnect the battery pack before storing your model.
To prevent any serious personal injury and/or damage to property, be
responsible when operating all remote controlled models.
The model car is not intended for use on public places and roads or
areas where its operation can conflict with or disrupt pedestrian or
vehicular traffic.
Do not use your model:
1.
Near real cars, animals, or people that are unaware that an RC car
is being driven.
2.
In places where children and people gather
3.
In limited indoor spaces
4.
In wet conditions
5.
In the street
6.
In areas where loud noises can disturb others such as hospitals and
residential areas
7.
At night or anytime your line of sight to the model may be obstructed
or impaired in any way.
To prevent any serious personal injury and/or damage to property, please
be responsible when operating all remote controlled models.
ELECTRICAL PRECAUTIONS
Insulate any exposed electrical wiring (using heat shrink tubing or
electrical tape) to prevent dangerous short circuits. Take maximum
care in wiring, connecting and insulating cables. Make sure cables
are always connected securely. Check connectors for if they become
loose. And if so, reconnect them securely. Never use R/C models with
damaged wires. A damaged wire is extremely dangerous, and can
cause short-circuits resulting in fire.
Low battery power will result in loss of control. Loss of control can
occur due to a weak battery in either the transmitter or the receiver
Weak running battery may also result in an out of control car if your
car's receiver power is supplied by the running battery. Stop operation
immediately if the car starts to slow down.
When not using RC model, always disconnect and remove battery.
Do not disassemble battery or cut battery cables.
battery short-circuits, approximately 300W of electrical power can be
discharged, leading to fire or burns. Never disassemble battery or cut
battery cables.
Use a recommended charger for the receiver and transmitter batteries
and follow the instructions correctly. Over-charging, incorrect charging,
or using inferior chargers can cause the batteries to become dangerously
hot.
Recharge battery when necessary. Continual recharging may
damage battery and, in the worst case, could build up heat leading to
fire. If battery becomes extremely hot during recharging, please ask
your local hobby shop for check and/or repair and/or replacement.
Regularly check the charger for potential hazards such as damage to the
cable, plug, casing or other defects. Ensure that any damage is rectified
before using the charger again. Modifying the charger may cause short-
circuit or overcharging leading to a serious accident. Therefore do not
modify the charger.
Always unplug charger when recharging is finished.
Do not recharge battery while battery is still warm. After use, battery
retains heat. Wait until it cools down before charging.
Do not allow any metal part to short circuit the receiver batteries or other
electrical/electronic device on the model.
Immediately stop running if your RC model gets wet as may cause short
circuit.
Please dispose of batteries responsibly. Never put batteries into fire.
EQUIPMENT RECOMMENDED (NOT INCLUDED)
Radio Transmitter
Radio receiver
Batteries for Transmitter
Electronic Speed Control
Steering Servo
Brushless Motor System
Pinion Gear (64 Pitch)
7.4V Li-Po Pack
190mm Body Shell
Touring Car Wheels, Tires and Inserts
TOOLS RECOMMENDED (NOT INCLUDED)
1.5mm, 2.0mm, 3.0mm Allen Wrench
5.0mm, 5.5mm & 7.0mm Hex Socket Wrench
Modelers Craft Knife
Small Cross Head Screw Driver
Turnbuckle Wrench
Calipers/Ruler
Camber Gauge
Battery Strapping Tape
Instant Glue/Thread Lock
Shock Oil
Gear, Diff. Grease, Joint Grease, Gear Diff Oil
Paint (for Bodyshell)
If the running
NOTE:
The Photon EX chassis uses the best available components.
replacement parts can be purchased from your local hobby or model
shop.
There are 2 versions of the Photon EX - Standard Chassis and Stiff
Chassis. Ask you local hobby shops for confirming which kit you would
like to purchase.
This instruction manual contains a blank setup sheet for your own setup
record.
Enjoy building and driving your Photon EX!!
All
Page 1

Advertisement

loading

Summary of Contents for T.O.P. Racing Photon EX

  • Page 1 Near real cars, animals, or people that are unaware that an RC car EQUIPMENT RECOMMENDED (NOT INCLUDED) The Photon EX is a professional 1/10 scale touring car and should be is being driven. built only by persons aged 16 years or older with previous experience In places where children and people gather •...
  • Page 2 ご案内 使用前に : * 下記の使用はしないで下さい。 必要な装備等 (キッ ト付属してません) 1.ラジコン操作に気づいてない自動車、 動物、 人間の近くでの使用 Photon EXはハイエンド向け1/10スケールツーリングカーです。 2.子供、 又は集団で集まっている場所 * 送信機 すでに組立てや、 ラジコンカー操作の経験を積んだ16歳以上のユーザーに 3.狭い室内スペース * 受信機 適していま 4.濡れた場所 * 送信機用バッテリー す。 玩具ではありませんので、 初心者や責任ある大人の監視のない子供だけで 5.公道 * スピードコントローラー(ESC) の使用は 6.騒音によって迷惑を掛ける病院、 居住地など * ステアリング サーボ  控えて下い。 7.夜間や、 又は視界が妨害されたり、 損なわれる場合 * ブラシレスモーターシステム 身体、 物への障害を防ぐために、 すべてのリモコンモデルの操作に * ピニオンギア(64ピッチ)...
  • Page 3 BAG A PO-PDT003 TC-PMJS03 TC-PMJS03 Spool Steel Outdriver 40T Spool 40T Flange - One-way/Spool TC-PML104 スプールスチールアウトドライバー 40T スプール 40T フランジ-ワンウェイ/スプール Bearing Cam ベアリングカム PA-SB1510 PA-101215 PA-SC0312 Bearing Shim Countersunk Stainless Steel Hex Screw ベアリング シム 皿ステンレス六角ビス 10 x 15 x 4mm 12 x 15 x 0.3mm M3 x 12 mm BAG B...
  • Page 4 BAG E x 1 TC-PDT008BL Front Belt フロントベルト x 1 TC-PDT006BL Rear Belt リアベルト PA-SF0330 PA-LN00M3 Stainless Steel Button Head Screw M3 Steel Nylon Lock Nut ステンレスボタンヘッドネジ M3 スチールナイロンロックナット M3 x 30mm BAG D BAG F AW-S100RD x 4 PA-SS0308BK x 20 PA-BM0306BK x 12 AW-M050RD...
  • Page 5 BAG i (x2) BAG H BAG i TC-PMMS02 x 2 AW-S050RD TC-PSUS01 TC-PSU003RD Ball Cup TC-PXCHS007 Collar Collar Threaded Sway Bar Adjuster ボールカッ プ Rear Shock Tower カラー カラー スレッドスウェイバーアジャ スター 10.5mm リアショックタワー 3 x 5.5 x 0.5mm 3 x 7 x 0.4mm PA-HBS0508 AW-S150RD AW-M100RD...
  • Page 6 BAG J BAG K PS-TR15575 PS-TR15650 TC-PXCHC008 Shock Spring Shock Spring Lipo Battery Mount Plate A ショックスプリング ショックスプリング リポバッテリーマウント プレートA TC-PXCHC010 14 x 1.5 x 5.75 14 x 1.5 x 6.50 TC-PXCHC009 Lipo Battery Mount Plate Center BAG K リポバッテリーマウント プレートセンター Lipo Battery Mount Plate B PA-CM0310BK リポバッテリーマウント...
  • Page 7 TC-PXCHC001 TC-PXCHS002 シャーシ シャーシ Chassis Chassis 標準 スティッ フ Standard Stiff TC-PXCHC004 TC-PXCHC005 アッパーデッキ アッパーデッキ Upper Deck Upper Deck PT-NTW001 標準 スティッ フ Standard Stiff Rod Wrench ロッドレンチ TC-PCH20H Foam Bumper フォームバンパー Page 7...
  • Page 8 SPOOL & GEAR DIFFERENTIAL \ スプール&ギアデフ BAG A Shim 12 x 15 x 0.3mm *NOTE: Flat Side Up PA-SC0312 Countersunk Stainless Steel Hex Screw シム 12 x 15 x 0.3mm 注意 : 平らな面を上 皿ステンレス六角ビス Countersunk Stainless Steel Hex Screw M3 x 12mm 40T Flange - One-way/Spool 皿ステンレス六角ビス...
  • Page 9 CENTER PULLEY & STEERING CRANK ASSEMBLY / センタープーリー & ステアリングクランク 組立て BAG C Chess Head Screw チェスヘッドネジ Bearing PA-SCM205BK ベアリング M2 x 5mm CENTER PULLEY ASSM. Chess Head Screw 5 x 10 x 4mm FINISHED チェスヘッ ドネジ M2 x 5mm PA-SB1005 Bearing Chess Head Screw チェスヘッドネジ...
  • Page 10 SUSPENSION MOUNT HOLDERS, BULKHEADS & MOTOR MOUNT ASSEMBLY サスペンションマウントホルダー, バルクヘッド & モーターマウント組立て Ultra Wide Collar BAG D ウルトラワイドカラー 3mm x 0.5t AW-M050RD x 12 Ultra Wide Collar Ultra Wide Collar ウルトラワイドカラー ウルトラワイドカラー 3mm x 0.5t 3mm x 1.0t AW-M100RD Ultra Wide Collar ウルトラワイドカラー...
  • Page 11 DRIVE TRAIN ASSEMBLY / ドライブトレーン組立て BAG E TC-PMLS02 ( BAG C) NOTE : Default Spur Gear Position NOTE : Default belt tension marker position Center Shaft Spacer 注意 : 初期設定スパーギア位置 注意 : 初期設定ベルトテンションマーカー位置 センターシャ フトスペーサー PA-LN00M3 M3 Steel Nylon Lock Nut Gear Diff Assm.
  • Page 12 CAMBER LINK PLATES & STEERING INSTALLATION / キャンバーリンクプレート & ステアリング取付け BAG F *NOTE: Apply small amount of thread lock at the set screw ONLY AT THE THREAD Buttom Head Screw AW-S100RD going into the camber link plate. Let it dry before installing the ball stud. ボタンヘッドネジ...
  • Page 13 FRONT & REAR SUSPENSION ARMS / フロント & リア サスペンションアーム BAG H AW-M100RD Right Front Arm 右フロントアーム Ultra Wide Collar ウルトラワイドカラー 3 x 7 x 1mm AW-M200RD Set Screw イモネジ Ultra Wide Collar M3 x 8mm ウルトラワイドカラー 3 x 7 x 2mm Collar カラー...
  • Page 14 SUSPENSION ASSEMBLY / サスペンション組立て BAG G PO-SDT009RD Steering Block Assm. (Make 2) 46mm Universal Bone make 2 ステアリングブロック組立て (2個作成) 46mm ユニバーサルボーン 2個作成 Bearing Set Screw PO-SDT026RD Universal Axle ベアリング イモネジ ユニバーサル アクスル 44.5mm Universal Bone 5 x 10 x 4mm M3 x 3mm 44.5mm ユニバーサルボーン...
  • Page 15 SUSPENSION ASSEMBLY (cont’d) / サスペンション組立て (続き) BAG H TC-PSU001 Hinge Pin ヒンジピン PA-SS0306BK Right Castor Assm. from P.13 Set Screw 右キャ スター組立て P.13から イモネジ x 4 M3 x 6mm Hinge Pin ヒンジピン Set Screw イモネジ M3 x 6mm Right Hub Assm. from P.13 Left Castor Assm.
  • Page 16 LINKAGES / リンケージ Steering Link (make 2) Front Camber Link (make 2) Rear Camber Link (make 2) Servo Link ステアリングリンク (2個作成) キャンバーリンク (2個作成) リアキャンバーリンク (2個作成) サーボリンク Ball Cup ボールカッ プ Ball Cup Ball Cup Ball Cup 14.5mm ボールカッ プ ボールカッ プ ボールカッ...
  • Page 17 UPPER DECK & STABILIZER BAR ASSEMBLY / アッパーデッキ & スタビライザーバー 組立て BAG F PA-BM0306BK Buttom Head Screw Buttom Head Screw ボタンヘッドネジ ボタンヘッ ドネジ M3 x 6mm x 16 M3 x 6mm Buttom Head Screw ボタンヘッドネジ M3 x 6mm 1.2mm ( COPPER ) for rear 1.2 mm (銅色)...
  • Page 18 STABILIZER BAR INSTALLATION/ スタビライザーバー取付け BAG i PA-SS0303BK FINISHED Stabilizer Linkage make 2 Set Screw スタビライザーリンケージ 2個作成 イモネジ M3 x 3mm Set Screw 3.5mm Stablizer Linkage イモネジ スタビライザー リンケージ PA-HBS0508 Ball Cup M3 x 3mm ボールカッ プ Ball Stud (Steel) 10.5mm ボールスタッド (スチール) 5.3 x 8mm Ball Stud (Steel) TC-PMHS01...
  • Page 19 SHOCK ASSEMBLY (MAKE 4) / ショック組立て (4個作成) Note: You could choose from a variety of shock piston to suit your needs. 注意 : さまざまなショックピストンから必要に応じて選ぶ Shock Top Cap ショックトッ プキャッ プ 2mm E-Clip 2mm E- クリッ プ 1.0mm hole 1.2mm hole OIL MIXED O-RING FOR DAMPERS 30 オイルミックスO-リング ダンパー30用...
  • Page 20 SHOCK INSTALLATION / ショック取付け BAG J PA-BM0306BK Button Head Screw ボタンヘッ ドネジ M3 x 6mm Rear Shock Tower リアショックタワー Button Head Screw ボタンヘッドネジ M3 x 6mm Front Shock Tower フロントショックタワー Button Head Screw ボタンヘッドネジ M3 x 6mm Page 20...
  • Page 21 BUMPER & BODY POSTS / バンパー & ボディーポスト BAG K TC-PMQS01 Lower Bumper ローアーバンパー Bumper Assm. バンパー組立て M3 Nut M3 ナット Lower Bumper PA-FN00M3 ローアーバンパー M3 Nut M3 ナッ ト PA-BM0306BK Button Head Screw ボタンヘッドネジ Button Head Screw M3 x 10mm ボタンヘッ ドネジ M3 x 6mm Button Head Screw M3 x 6mm ボタンヘッドネジ...
  • Page 22 SERVO INSTALLATION / サーボ取付け BAG L AW-M300RD *NOTE: Use the appropriate servo arm for your servo (refer to P.5) “注意 : 適正なサーボアームを使用 (P.5参照) Ultra Wide Collar ウルトラワイドカラー Set Screw x 11 3 x 7 x 3.0mm Servo Mount イモネジ Button Head Screw サーボマウント...
  • Page 23 MOTOR & BATTERY GUIDE INSTALLATION / モーター & バッテリーガイド取付け BAG M PA-CM0310BK Countersunk Screw Countersunk Screw 皿ビス 皿ビス M3 x 10mm M3 x 10mm AW-BW31RD Small Bevel Washer イモネジ スモール べベルワッシャー PA-OR1004 O-Ring 2 x 4 O-リング 2 x 4 Small Bevel Washer スモール べベルワッシャー...
  • Page 24 ANTENNA & WHEEL INSTALLATION / アンテナ & ホイル 取付け BAG L PA-CM0306BK Countersunk Screw 皿ビス M3 x 6mm Countersunk Screw 皿ビス M3 x 6mm BAG M PA-SNF4BK M4 Steel Serrated Wheel Nut M4 スチールセレートホイルナット M4 Steel Serrated Wheel Nut M4 スチールセレートホイルナット Page 24...
  • Page 25 Your Photon EX is now ready to RUN!!! Photon EX 走行用意!!! Page 25...
  • Page 28 OPTIONAL PARTS LIST / オプションパーツリスト Chassis / シャーシ Shock Spring / ショックスプリング バッテリーマウントテープ- 黒 Gamma Shock Spring (14 x 1.5 x 5.50) 393gf/mm , 22.0lb/in Battery Mount Tape - Black PA-BMT01BK Gamma Shock Spring (14 x 1.5 x 5.50) 393gf/mm , 22.0lb/in PS-TR15550 バッテリーマウントテープ...