Advertisement
1
3.13 HOW TO REMOVE THE SW ARM
1. According to "3.12 HOW TO REMOVE THE ROLLER ASSY", remove the Roller Arm ASSY.
2. Remove the Return Spring of SW Arm (Fig.1).
A
3. Expand the Right SW Arm until the end contacts the Chassis (Fig.2).
4. Hold the SW Arm up while expanding it and remove it.
Fig.1
B
Fig.2
C
D
3.14 HOW TO REMOVE THE DAMPER
1. According to "3.10 HOW TO REMOVE THE CRG MECHANISM ASSY", remove the CRG Mechanism.
2. Insert the flathead screwdriver under A-part of plate which is joined with the Damper, raise the plate and release the
clinch.
3. Similarly, insert the flathead screwdriver under C-part, raise the plate, release the clinch and remove the Damper.
C
E
Caution: Make sure to reinstall the clinch after repair.
F
32
1
2
Return Spring of SW Arm
Expand the Right SW Arm
CX-3283
2
3
Expand the Right SW Arm
until it contacts this point.
A
3
4
4
http://www.Datasheet4U.com
Advertisement
