Power On And Enter Into The On Mode; Enter Into The Test Mode; Custom Settings; Manual Capturing - Braun BLACK400phone Instruction Manual

the write-protect switch of the SD-card is on the "write" position.
When use MMS/e-mail function, be sure to insert SIM-card into the SIM-card slot
with angle in the lower left.

3.3 Power on and enter into the ON Mode

Before switching on, please pay attention to the following:
1. Avoid temperature and motion disturbances that could be construed as animals
or humans such as trees that are exposed to direct sunlight for much of the day or
any other heat source. These may cause false triggers
2. The height from ground for placing the camera should 1 meter with the object.
For example for deer waste height is good size appropriately. In general, one to two
meters are preferred.
Slide the power switch to the ON position to power on the camera and enter into
the ON mode.
After switching on the camera, the motion indication LED (red) will blink for about
15s. The 15s is a buffering time before automatic capturing photos or videos, e.g. for
closing and locking the bottom cover, fixing the camera on a tree and walk away.
In ON mode, the camera will take pictures or videos automatically according to the
default settings or previous custom settings. The camera has the sound recording
function, so the sound will be embedded in the video clip while capturing a video.

3.4 Enter into the TEST Mode

Slide the power switch to the TEST position to enter into the TEST mode. There are
some functions in TEST mode: Custom settings, manual capture, preview.

3.4.1 Custom Settings

Press the MENU switch to enter into menu setting. The camera can be taken over
control to manually customize the camera settings which display on the camera or
external TV monitor. The detailed operations will be described in "Advanced
Operations" chapter.

3.4.2 Manual Capturing

You can press SHUTTER to manually capture photos or recording video.

3.4.3 View Images or Videos

There are two ways to view the captured images or videos:
1. LCD screen on camera
2. TV monitors which connects to camera with TV cable
Turn right the select switch to view images, the latest image will be shown in the LCD
screen on camera or TV monitor. Press UP to view the previous image and press
DOWN for the next. The detailed operations like deleting images or videos will be
described in "Advanced Operations" chapter.
8