Before Use - Panasonic EH-HV52 Operating Instructions Manual

Before Use

Attaching and removing attachments
■ Attaching
1
1
Hold the attachment at the
tip as illustrated.
2
2
Push in the attachment
along the groove on the
Push Button side until you
hear a click sound.
■ Removing
Press the Push Button, and
pull out the attachment while
holding it as illustrated.
►Note
● Do not touch the heated sections such as Iron Plates when
attaching or removing attachments.
Heating the Iron Plate
1
1
Insert the plug into the household outlet.
2
2
Press and hold the Power Switch to turn on the
straightener. (see page 9)
• The Illumination Lamp glows.
3
3
Set a temperature by using the Temperature
Level Adjustment Switches according to the
type and condition of your hair.
• When you use the straightener for the first time, be sure
to set the temperature level to 140.
Indicator Temperature
230
Approx. 230 °C
200
Approx. 200 °C
180
Approx. 180 °C
160
Approx. 160 °C
140
Approx. 140 °C
• Confirm that the LED Temperature Level Display has
changed.
►Notes
● A temperature level of more than 200 is high and may
damage your hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
● After switching on, the straightener reaches operating
temperature (approximately 100 ˚C) after about 15
seconds.
The time taken to reach operating temperature may
vary depending on the operating environment.
Hair type Hair Condition
Thick Less damaged
Fine Damaged
11