1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: HINGE ASS'Y (Refer to Fig. 1-1)
1.
Remove the 3 screws (1).
2.
Remove the Stand in the direction of arrow (A).
3.
Remove the 4 screws (2).
4.
Remove the Stand Angle in the direction of arrow (B).
5.
Remove the 4 screws (3).
6.
Remove the Hinge Ass'y in the direction of arrow (C).
Stand
(A)
1-2: BACK CABINET (Refer to Fig. 1-2)
1.
Remove the 10 screws (1).
2.
Remove the Back Cabinet in the direction of arrow.
(1)
(1)
(1)
DISASSEMBLY INSTRUCTIONS
(3)
(3)
(3)
(1)
(2)
(1)
(1)
(C)
Stand Angle
(B)
Hinge Ass'y
(1)
(1)
(1)
(1)
(1)
(1)
(1)
Back Cabinet
1-3: ANGLE BACK (Refer to Fig. 1-3)
1.
Remove the 3 screws (1).
2.
Remove the Angle Back in the direction of arrow.
(2)
(3)
1-4: OPERATION PCB (Refer to Fig. 1-4)
1.
Disconnect the following connector: (CP2001).
2.
Remove the 3 screws (1).
3.
Remove the Panel Side in the direction of arrow (A).
4.
Remove the 3 screws (2).
5.
Remove the Operation PCB in the direction of arrow (B).
Fig. 1-1
Fig. 1-2
B1-1
(1)
(1)
(1)
Angle Back
(2)
(2
(2)
(B)
Operation PCB
(1)
(1)
Fig. 1-3
CP2001
(1)
Panel side
(A)
Fig. 1-4