Table of Contents
Advertisement
SENDING FAXES
6
Press [Start/Copy].
7
Dial the other party's fax number.
¶ You can enter the other party's fax number
using the numeric buttons, One-touch Speed
Dialling (see p. 58), or Coded Speed Dialling (see
p. 58).
¶ If you use the numeric buttons, press
[Start/Copy] after entering the number to register
it before going on to the next number.
8
Press [Start/Copy].
The fax reads the document into memory.
After scanning in the document, the fax displays TIMER on the LCD. When the set time comes, the fax
dials and sends the document.
TIMER
Sending other documents while the fax is set for
Delayed Sending
You can send, receive, and copy other documents even when the fax is set for sending at a preset time.
The fax can only register one preset sending operation at a time.
To send or copy other documents after setting the fax for Delayed Sending, simply send or copy using
any other sending procedure in this manual.
Note
Delayed Sequential Broadcasting
Delayed Sequential Broadcasting is applicable for sending one document to more than one location
at a later time when multiple fax numbers are dialled. See p. 66.
64
Start/Copy
TEL=
TEL=
Start/Copy
TX/RX NO.
MEMORY INPUT P01
34567890
XXXX
1 sec.
Advertisement
Table of Contents
