Assembling the fax
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
To see how the fax looks fully assembled, see Main components of the fax, p. 24.
Attaching components
j Paper Tray
Make sure the paper lever is in the position . Then place the paper tray into the
fax, making sure the two tabs fit in the appropriate slots on the fax.
This symbol indicates the
use of a function
(envelope printing) not
Paper lever
available with this model.
j Paper Tray Cover
Place the paper tray cover over the paper tray, making sure the two tabs fit in the
appropriate slots on the fax.
5