Remove And Replace Field-Replaceable Units; Removing And Replacing A Fan Module; Installation Guidelines; Removing The Fan Module - Cisco Catalyst PON Series Hardware Installation Manual

Remove and Replace Field-Replaceable Units

•
•

Removing and Replacing a Fan Module

The fan module can be removed and replaced only on a CGP-OLT-8T.

Installation Guidelines

Observe these guidelines when removing or installing a fan module:
• Do not force the fan module into the slot. This can damage the pins on the device if they are not aligned
• A fan module that is only partially connected to the device can disrupt the system operation.
• The device supports hot swapping of the fan module. You can remove and replace the module without
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030

Removing the Fan Module

Before you begin
• See
• Ensure that you have the following tools and accessories available:
Removing and Replacing a Fan Module, on page 45
Removing and Replacing the Power Supply Module, on page 47
with the module.
interrupting normal device operation.
Installation Guidelines.
• Phillips head screwdriver
• Antistatic mat
C H A P T E R
Cisco Catalyst PON Series Switches Hardware Installation Guide
3
45