Installing Field Replaceable Units; Installing A Power Supply; Power Supply Overview - Cisco Catalyst 9500 Series Hardware Installation Manual

Installing Field Replaceable Units

•
•
•

Installing a Power Supply

Power Supply Overview

The switch chassis has two slots in which you can install power supplies using any of the following
combinations:
• Two AC, two DC or AC-DC power supplies
• One AC-input power supply or one DC-input power supply (leaving the blank cover on the other slot)
Note
If you leave any power supply slots empty, you must ensure that the blank cover (Part Numbers
C9K-PWR-C4-BLANK and C9K-PWR-C5-BLANK) is installed in that slot to maintain the designed airflow.
This table lists the power supply models.
Part Number
PWR-C4-950WAC-R
C9K-PWR-650WAC-R
C9K-PWR-1600WAC-R
C9K-PWR-930WDC-R
C9-PWR-950WDC-R
C9K-PWR-1600WDC-R
Installing a Power Supply , on page 45
Installing a Fan Module, on page 58
Installing an SSD Module, on page 61
C H A P T E R
Description
950W AC Power Supply
650W AC Power Supply
1600W AC Power Supply
930W DC Power Supply
950W DC Power Supply
1600W DC Power Supply
Cisco Catalyst 9500 Series Switches Hardware Installation Guide
5
45