Table of Contents
Advertisement
6. Restore System
You can restore preinstalled files once they are damaged by running the recovery from the
hidden partition. To restore the operating system and all preinstalled software, follow the
steps below.
Note: After recovery, you need to re-install all settings and passwords. But the recovery will
not delete your recording files saved on the GV-Tower NVR/VMS System V2 (Rev. D) since
it only reformats the partition C and all your files are still stored on other partitions.
1. Remove or turn off the power of any connected USB devices.
2. Turn off the power of all drive bays.
3.
Restart the
GV-Tower NVR/VMS System V2 (Rev.
4.
Press F11 button several times to avoid accessing the system.
5. When this screen appears, click the OneKey System Recovery button.
6. Select Restore system using the image file in AOMEI OneKey Recovery Partition
and click Next.
D).
32
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-Tower System V2 and is the answer not in the manual?
Questions and answers