Adding Hot Swap Drive To Recording Path - GeoVision GV-Tower System V2 Quick Start Manual

5.1.1

Adding Hot Swap Drive to Recording Path

1. On GV-VMS, click Home
Configure, click Record Setting. The Record Setting dialog box appears.
2. Click the Arrow button
3. On the Add Log Location dialog box, add a hard drive to the recording path by following
the steps below:
3-B
A. To add a new folder in the first storage group, click the Add button
pane and select a folder. Each partition can only contain 1 storage folder (e.g. only 1
folder in D drive).
B. To add a new storage group, click the Add button
step 3-A to assign at least one folder to the storage group.
C. Click OK.
4. To add another formatted hard drive for storage, repeat the above steps.
For details on setting the recording path, see Setting Up the Video Storage Location Chapter
1, GV-VMS User's Manual (C:\UserManual).
, select Toolbar
next to Storage.
3-A
, select Configure
on the left pane and repeat the
25
, select System
on the right