Charging The Battery Pack Abroad - Sony Handycam HDR-XR100E Operating Manual

To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever  and remove the battery pack
.
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the battery pack. "
Notes on the battery pack and the AC Adaptor
When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure

that the (Movie) lamp/
off.
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This

may cause a malfunction.
In the default setting, the power turns off automatically if you leave your camcorder without any

operation for approximately 5 minutes, to save battery power ([A.SHUT OFF]).

Charging the battery pack abroad

You can charge the battery pack in any countries/regions using the AC Adaptor supplied
with your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.
Do not use an electronic voltage transformer.

(Photo) lamp (p. 12)/ACCESS lamps (p. 10)/access lamp(p. 41) are turned
11