Charging The Battery Pack - Sony Handycam HDR-CX250E Operating Manual

Charging the battery pack

1
Close the LCD screen and attach
the battery pack.
2
Connect the AC Adaptor () and
the power cord (mains lead) () to
your camcorder and the wall outlet
(wall socket).
The CHG (charge) lamp turns on.

The CHG (charge) lamp turns off when the

battery pack is fully charged. Disconnect the
AC Adaptor from the DC IN jack of your
camcorder.
Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

GB
1
Battery pack
DC IN jack
CHG (charge)
lamp
To the wall outlet (wall socket)
HDR-PJ600E/
PJ600VE/XR260E/
XR260VE
Align the  mark
on the DC plug
with that on the
DC IN jack
DC plug

