Checking The Triangulating Status - Sony Handycam HDR-CX250E Operating Manual

Checking the triangulating
status
The camcorder displays the status of the
GPS signal reception when you are unable
to obtain the triangulating information.
1
Display your current location
(p. 42).
If your current location appears on
the LCD screen, you do not need to
continue this operation.
2
Select .
Satellite icons
Satellite map
Triangulating Information for the
gauge location that was
previously obtained.
To close the triangulating information

screen, select
On the satellite map and
triangulating gauge
The center of the satellite map shows
your current location. You can check the
.
direction (north/south/east/west) of the
satellites with the satellite icons () that
appear on the satellite map.
When the camcorder succeeds in
triagulating your location, the triangulating
gauge turns to green.
How to check the GPS satellite icons/
triangulating gauge
The color of the GPS satellite icons and the
triangulating gauge change according to the
current status triangulation.
GPS satellite icons/ Status
triangulating gauge
No signal, but orbit
/ (black)
information for the
satellite is available.
Part of the satellite orbit
/ (gray)
information has been
obtained.
About a half of the
/ (brown)
satellite orbit information
has been obtained.
Most of the satellite orbit
/ (ocher)
information has been
obtained.
Triangulating is
/ (green)
completed and the
satellite is currently being
used.
If data on your current location
cannot be obtained
A display that allows you to triangulate the
location again appears. In this case, follow
the instructions that appears on the LCD
screen.
GB