Advertisement
Hazardous Substance Statement
Bante is committed to the reduction and eventual elimination of all hazardous
substances in both the manufacturing process and finished products we supply.
We have an active manufacturing and procurement program to minimize and
eliminate the use of harmful heavy metals such as cadmium, lead, mercury and
the like.
New technologies and design parameters are also promoting these efforts and
we expect to have little or no such materials in our product in the coming years.
We welcome our customers suggestions on how to speed up these efforts.
Warranty
The warranty period for PHscan series tester is 12 months from the date of
shipment. Above warranty does not cover pH electrode module and calibration
solutions. For more information, please contact nearest authorized distributor.
BANTE INSTRUMENTS LIMITED
E-mail: banteinstruments@yahoo.com
Phone: 0086-21-6404-1598
Website: www.bante-china.com
The information in this document is subject to change without notice.
Copyright © Bante Instruments Limited, 2013. All rights reserved.
PHscan20 Pocket pH Tester
Instruction Manual
BANTE INSTRUMENTS LIMITED
Technology to create the future...
Advertisement
Table of Contents
Related Manuals for Bante Instruments PHscan20
Summary of Contents for Bante Instruments PHscan20
- Page 1 For more information, please contact nearest authorized distributor. BANTE INSTRUMENTS LIMITED E-mail: banteinstruments@yahoo.com Phone: 0086-21-6404-1598 Website: www.bante-china.com BANTE INSTRUMENTS LIMITED The information in this document is subject to change without notice. Technology to create the future... Copyright © Bante Instruments Limited, 2013. All rights reserved.
-
Page 2: Inserting The Batteries
Introduction Inserting the Batteries Thank you for selecting the PHscan20 pocket pH tester. This manual provides Before using the tester, insert batteries into the battery compartment, follow a step-by-step guide to help you operate the meter, please carefully read the the procedure outlined below. -
Page 3: System Menu
PHscan20 PHscan20 System Menu Preparation of pH Standard Buffer Solutions The tester contains an integrated system menu that allows you to customize The tester is packaged with three pH buffer packets required for calibration. each displayed option to meet personal preference. - Page 4 PHscan20 PHscan20 Press ENTER key to confirm, the tester goes to calibration point selection mode, the display shows “2/CAL” (2 points calibration). Enter Enter When the auto-off function is enabled, if you do not press any keys for 8 minutes, the tester will automatically turn off to conserve energy.
-
Page 5: Single Point Calibration
PHscan20 PHscan20 pH Calibration 2 Points Calibration — Make sure that you have selected 2 points calibration in the system menu. During pH mode, the tester allows up to 3 points calibration. We recommend — Repeat steps 2 to 5 above. When the first calibration point is completed , the that you perform at least 2 points calibration for high accuracy measurement. -
Page 6: Troubleshooting
PHscan20 PHscan20 — Rinse the electrode with distilled water, dip the electrode into the pH10.01 — If you do not use the tester for long periods, please store the sensor with (or pH9.18) standard buffer solution. electrode storage solution. DO NOT use de-ionized or distilled water. -
Page 7: Specifications
PHscan20 PHscan20 Optional Electrode Modules Appendix 2: Standard pH Buffers The following tables shows the various pH values at different temperature of ORDER CODE ITEM the solution during the calibration. Standard pH Electrode Used for routine pH measurements, E-PHSCAN-ST NIST STANDARD: e.g.
Need help?
Do you have a question about the PHscan20 and is the answer not in the manual?
Questions and answers