Page 1
Order #XXXXX - ECO-2054 - 10’x20’ Inline Display 10’ 20’ Plan View 866.463.2611 • www.ecosystemsdisplays.com...
Page 2
General Setup Instructions •The setup instructions are created specifically for your configuration. •Setup instructions are laid out sequentially in levels, including exploded views and a logical series of steps for assembly. We encourage you to study the instructions before attempting to assemble your exhibit. Cleaning and Packing •Use non-abrasive cleaners when cleaning extrusions or ECO Glass inserts.
Page 3
ECO Panel Install Place ECO panel together with a vertical offset, slide down to lock connector in place. Panel Corner Connectors are installed just like ECO panels. Remove by off-setting top lock clips horizontally followed by separating vertically. Graphic Install Graphic is installed corners first.
Page 5
Steps: 1) Install Monitor Mounts to horizontal [4,9]. Monitor Mount Attachment detail. 2) Run power cords for monitor through holes in extrusion to power source, as shown. 3) Attach Lights to top of backwall. Light Attachment detail. Hole for wire management 4) Apply remaining SEG Graphics &...
Page 6
Bolts Bolts Using Your Setup Instructions The Aero Overhead Sign Setup Instructions are created specifically for your configuration. They include an exploded view of the frame which is sequentially numbered. We encourage you to study the instructions before attempting to assemble your exhibit. Connections are kept very simple: no tools.
Need help?
Do you have a question about the ECO-2054 and is the answer not in the manual?
Questions and answers