Parameter - Moehlenhoff RDB 742X2-00 Manual

Parameter

Parameter
Temperature
for presence in
heating mode
Temperature
for presence in
cooling mode
ENG
DAN
Setback temperature
for heating mode
NOR
FIN
Setback temperature
SWE
for cooling mode
POL
Floor heating
RUS
Minimum tempera-
(only RDF 64212-xx)
(Condition: The
external tempera-
ture sensor must be
parametrized and
installed as floor
18
ture
sensor)
Symbol Steps
¾ Activate and set the
desired temperature.
¾ Confirm by pressing.
¾ Activate and set the
desired temperature.
¾ Confirm by pressing.
¾ Activate and set the
desired temperature.
¾ Confirm by pressing.
¾ Activate and set the
desired temperature.
¾ Confirm by pressing.
¾ Activate and select the
desired comfort tempe-
rature (1.0 ... 6.0 ≈ 18 °C
... 28 °C
¾ Confirm by pressing.
Lights up when the floor
temperature is fallen short
of.
--
= deactivate)