Ec Declaration Of Conformity - Black & Decker ASD18 Original Instructions Manual

ENGLISH
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
ASD18 - Drill
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Black & Decker.
Black and Decker UK, 270 Bath Road, Slough
10
(Original instructions)
Ed Higgins
Director - Consumer Power Tools
Berkshire, SL1 4DX
United Kingdom
12/11/2020

EC declaration of conformity

MACHINERY DIRECTIVE
%
ASD18 - Drill
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU.
For more information, please contact Black & Deckerat the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Black & Decker .
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24
months from the date of purchase, Black & Decker guarantees
to replace defective parts, repair products subjected to fair
wear and tear or replace such products to ensure minimum
inconvenience to the customer unless:
The product has been used for trade, professional or hire
u
purposes;
The product has been subjected to misuse or neglect;
u
The product has sustained damage through foreign
u
Patrick Diepenbach
General Manager, Benelux
Black and Decker,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
12/11/2020