Shooting menu
(Flash)
• For details on the white balance, see page 10.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2], [Fluorescent Light 3].
• Except in [Flash] modes, [White Bal] is set to [Auto] when the flash strobes.
Flash Level: Adjusting the amount of flash light
Adjusts the amount of flash light.
(–)
(Normal)
(+)
• To change flash mode, see page 26.
Red Eye Reduction: Reducing the red-eye phenomenon
(Auto)
(On)
(Off)
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
For details on the operation 1 page 38
Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Toward –: Makes the flash level lower.
Toward +: Makes the flash level higher.
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
Reduces the red-eye phenomenon whenever necessary, only
when using the Face Detection Function.
The flash always strobes to reduce the red-eye phenomenon.
Does not use Red Eye Reduction.
49