Troubleshooting
The image colors are not correct.
Set [Color Mode] to [Normal] (page 43).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on
•
the image. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] to [On] (page 49).
•
•
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
•
Retouch the image using [Red Eye Correction] (page 57).
•
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 2).
•
The image seen through the finder does not match with the actual recordable
range.
The parallax phenomenon is occurring when the subject is close. In this case, to confirm the
•
recordable range, use the LCD screen.
Images cannot be confirmed through the finder while the digital zoom is in use.
•
Cannot shoot images in succession.
The internal memory or "Memory Stick Duo" is full. Delete unnecessary images (page 34).
•
The battery level is low. Install charged battery pack.
•
Viewing images
Your camera cannot playback images.
•
Press
(Playback) button (page 32).
The folder/file name has been changed on your computer (page 87).
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection (page 85).
•
107