Warning Indicators And Messages - Sony DSC-W200 Handbook
Cyber-shot w200 - powerful camera finished in smart silver aluminium, with 12.1 effective megapixels, hd output, double anti-blur and face detection technologies, zeiss 3x optical zoom lens, 2.5-inch lcd screen, viewfinder and stamina battery life.
Hide thumbs
Also See for DSC-W200:
- Service manual (65 pages) ,
- Instruction manual (64 pages) ,
- Brochure & specs (31 pages)
Table of Contents
Advertisement
Warning indicators and messages
Self-diagnosis display
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, your camera may need repair.
Contact your Sony dealer or local
authorized Sony service facility.
C:32:
ss
•
There is trouble with your camera's
hardware. Turn the power off and on
again.
C:13:
ss
The camera cannot read or write data on
•
the "Memory Stick Duo". Try turning
off and on the camera again, or taking
out and inserting the "Memory Stick
Duo" several times.
The internal memory has experienced a
•
format error, or an unformatted
"Memory Stick Duo" is inserted.
Format the internal memory or the
"Memory Stick Duo" (pages 62, 65).
The inserted "Memory Stick Duo"
•
cannot be used with your camera, or the
data is damaged. Insert a new "Memory
Stick Duo".
E:61:
ss
E:62:
ss
E:91:
ss
A camera malfunction has occurred.
•
Initialize the camera (page 66), then
turn the power on again.
114
ss
) will differ depending on
Messages
If the following messages appear, follow
the instructions.
E
The battery level is low. Charge the
•
battery pack immediately. Depending
on the conditions of use or the type of
battery pack, the indicator may flash
even though there are still 5 to 10
minutes of remaining battery time left.
For use with compatible battery only
The battery inserted is not an NP-BG1
•
battery pack.
System error
•
Turn the power off and then on again.
Internal memory error
Turn the power off and then on again.
•
Reinsert the Memory Stick
Insert the "Memory Stick Duo"
•
correctly.
The inserted "Memory Stick Duo"
•
cannot be used in your camera
(page 118).
The "Memory Stick Duo" is damaged.
•
The terminal section of the "Memory
•
Stick Duo" is dirty.
Memory Stick type error
The inserted "Memory Stick Duo"
•
cannot be used in your camera
(page 118).
Cannot access Memory Stick Access
denied
You are using the "Memory Stick" with
•
the access controlled.
Advertisement
Chapters
Table of Contents
