Canon PowerShot SD100 User Manual page 145

USB Port
USB Cable
DIGITAL
Terminal
USB Cable
• You do not need to turn off the computer or camera when making a
USB connection.
• Please refer to your computer's manual for information regarding the
location of the USB port.
Power Lamp
Please refer to the Software Starter Guide for the subsequent
procedures.
Connect the supplied USB interface
2
cable to the computer's USB port
and the camera's DIGITAL terminal.
To connect to the DIGITAL terminal of the
camera, slip your fingernail under the edge
of the terminal cover to open it, then insert
the connector until you hear it click into
place.
Turn the camera's mode switch to
1
(Replay).
Press the ON/OFF button until the
2
power lamp lights green.
The LCD monitor will turn on in replay mode
and then blank out when the connection to
the computer is complete.
143